EasyManua.ls Logo

damian LXS9 Series User Manual

damian LXS9 Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
X
INSTALLATION AND SERVICE
PROGRAMMING
This manual is for skilled service personnel only
DAMIAN S.R.L. - VIA RAGAZZI DEL „99 N°30 - 21053 CASTELLANZA (VA) - ITALY
Rev. M - 01 Vers. Software 1.1a or follow.
Question and Answer IconNeed help?

Do you have a question about the damian LXS9 Series and is the answer not in the manual?

damian LXS9 Series Specifications

General IconGeneral
Branddamian
ModelLXS9 Series
CategoryVending machines
LanguageEnglish

Summary

IDENTIFICATION, USE AND TECHNICAL DATA

SAFETY AND HANDLING WARNINGS

UNPACKING PROCEDURES

Procedures for safely removing the vending machine from its packaging and protective materials.

BASE PLATE ASSEMBLY

Instructions for attaching the base plate to the vending machine for stability and aesthetic purposes.

MACHINE INSTALLATION

POWER SUPPLY AND SAFETY SWITCH

POWER CORD REPLACEMENT

Guidelines for safely replacing the power cord of the vending machine.

USING THE SAFETY SWITCH

Explanation of the safety switch function for powering electrical parts only when the door is closed.

PAYMENT SYSTEM INSTALLATION

MDB PAYMENT SYSTEMS

Steps for installing and configuring MDB payment systems for vending machines.

EXECUTIVE PAYMENT SYSTEMS

Instructions for installing optional executive payment kits and their configuration.

COMPONENT IDENTIFICATION

OVERTEMPERATURE CONTROL

TROUBLESHOOTING AND ERROR MESSAGES

DISPLAYED ERROR MESSAGES

Overview of error messages displayed on the vending machine and their potential causes.

ADDITIONAL PROBLEM RESOLUTION

MOTOR ANOMALY MESSAGES

Explains messages related to motor malfunctions and provides troubleshooting steps.

REFRIGERATION UNIT MAINTENANCE

FUSE INFORMATION

ROUTINE MAINTENANCE AND LUBRICATION

SAFETY SWITCH CHECK

Procedure for checking the correct operation of the safety switch on the vending machine.

SLIDING PANEL MAINTENANCE

Guide to checking and lubricating the sliding anti-theft panel and its components.

FTCA VENDING SENSOR CLEANING

Instructions for cleaning the FTCA vending sensors to ensure accurate product detection.

ENVIRONMENTAL AND WARRANTY INFORMATION

EC DECLARATION OF CONFORMITY

GENERAL WARRANTY CONDITIONS

Related product manuals