damian LXS9 Series User Manual

Serie "LXS9"
Pagina A - 3
Rev. M - 01
DEFAULT = VALUE USED AUTOMATICALLY BY A NEW OR REINITIALISED CARD
GENERAL PARAMETERS
> MESSAGE LANGUAGE:
To establish the language of the messages that appear on the display.
[ Default: Italian ]
> OPERATING MODE:
To set the vending machine operating mode. Settable values:
„Test Vend‟ to operate in free sale, for example to perform the sale test.
„Executive‟ to operate with Executive payment systems;
„MDB‟ to operate with MDB payment systems;
[ Default: MDB]
N.B.: Make sure that when setting the parameter to „Test Vend‟, the vending machine allows sales of the
products without deducting the credit.
> CLOCK SETTING:
To set the current date and time.
> CLOCK VISUALISATION ENABLE:
To activate or deactivate visualisation of the current time while the vending machine is awaiting a sale.
Settable values: „Disabled‟ (OFF), „Enabled‟ (ON).
[ Default: enabled]
> ENERGY SAVING PROGRAMMING:
To activate and set the parameters of the energy saving functions, which are only available if the vending
machine has the Vivilight Kit installed.
Energy Saving allows activating two separate energy saving functions:
- Save Mode function: Kicks in after a programmed vending machine inactivity time and reduces the
electrical consumption of the vending machine working, for example, on the reduction of the lighting and
the turning off of indicator lights and non-essential components.
- Night Mode function: Kicks in during programmed time intervals (for example, during nighttime hours)
after a period of vending machine inactivity and reduces the electrical consumption of the vending machine
to the minimum, working, for example, with the turning off of the lighting, of indicator lights and of non-
essential components. Furthermore, if the vending machine is NOT programmed to contain perishable
products ("Refrigerator operation” parameter other than “Food & Snack”), it allows setting a higher
operating temperature only activated during those time intervals.
The energy saving function setting modes are given below.
Programming
General param.
Language
Current value
F
Programming
General param.
Time Dsp Enable
Current value
F
Programming
General param.
Operating mode
Current value
F
Programming
General param.
dddd/mm/yy hh:mm
Current value
F

damian LXS9 Series Specifications

General

Brand	damian
Model	LXS9 Series
Category	Vending machines
Language	English