Serie "LXS9"
Pagina A - 4
» SAVE MODE - ACTIVATION DELAY:
(Visible and programmable only with Vivilight Kit installed)
This parameter allows setting the time in minutes that must elapse, without anyone using the vending
machine, before the Save Mode function is activated (attenuation of the intensity of the LED lamps).
Settable values: 0 ÷ 120 minutes. Set the parameter to Zero „0‟ to deactivate the function.
[ Default: 0 minutes]
» SAVE MODE - LIGHT INTENSITY:
(Visible and programmable only with Vivilight Kit installed)
This parameter allows setting the luminous intensity (in %) of the LED lamps that light up the display
window when the Save Mode function is activated. Settable values: 0 ÷ 100% .
[ Default: 100% ]
» NIGHT MODE - TIMETABLE:
(Visible and programmable only with Vivilight Kit installed)
This parameter allows setting the start and end times of the Night Mode function.
Set the times to 00:00 - 00:00 to disable the function.
[ Default: 19:00 – 07:00 ]
» NIGHT MODE - LIGHT INTENSITY:
(Visible and programmable only with Vivilight Kit installed)
This parameter allows setting the luminous intensity (in %) of the LED lamps that light up the display
window when the Night Mode function is activated. Settable values: 0 ÷ 100% .
[ Default: 100% ]
» NIGHT MODE - INTERNAL TEMPERATURE SETTING:
(Visible and programmable only with Vivilight Kit installed and “Refrigerator operation” other than “Food & Snack”)
This parameter allows setting the internal temperature of the vending machine when the Night Mode
function is activated. Settable values: 0 ÷ 50°C.
[ Default: 0°C ]
The refrigerator temperature raising function is deactivated during the Night-Mode period if the
parameter is set to „0‟ (Zero) or to a value below the one set as standard internal temperature („Set Std
Temp 1‟ in the “Refrig. Param‟s” menu).
This parameter can also be programmed through the “Refrig. Param‟s” menu.
Programming
General param.
SaveMode delay
Current value
Programming
General param.
Light in SaveMod
Current value
Programming
General param.
Night Mode times
hh:mm – hh:mm
Programming
General param.
Night Mode light
Current value
Programming
General param.
Night Mode Temp.
Current value