DAMM TetraFlex BS414 - User Manual

TetraFlex
®
V7.6
(w. US remarks)
Manual version 1.00
The information contained in this document is the property of Damm Cellular Systems A/S. This document is
subject to copyright and shall not be published or reproduced, in whole or in part, without the written permission
of Damm Cellular Systems A/S.
© 2010 Damm Cellular Systems A/S. All rights reserved.
Møllegade 68, DK-6400 Sønderborg, Denmark
Phone: +45 74 42 35 00, Fax: +45 74 42 30 31,
E-Mail: dcs@damm.dk,
http://www.damm.dk

Summary

INTRODUCTION

PART-1: HARDWARE INSTALLATION

1.1 SB421- INSTALLATION

Detailed instructions for installing the SB421 Service Box, covering environmental requirements, placement, and grounding.

1.2 BS421- INSTALLATION

Installation guide for the BS421 Base Station, including environmental requirements, placement, grounding, and component overview.

1.3 BS41 X - INSTALLATION

Instructions for installing the BS41x Base Station, covering environmental requirements, placement, grounding, and antenna connections.

PART-2: SW INSTALLATION AND CONFIGURATION

2.3 DONGLE CONFIGURATION

2.4 SOFTWARE INSTALLATION

Guide for installing TetraFlex software, including CF Storage media, Windows licenses, and installation/upgrade procedures.

2.5 SB421 CONFIGURATION

Steps for configuring the SB421, including initial setup, Ethernet connection, BIOS configuration, and IP/MAC address settings.

2.6 BS421 CONFIGURATION

Configuration procedures for the BS421, covering Ethernet connection, IP setup (DHCP/Static), TR421 update, and Windows CE installation.

2.7 BS41 X CONFIGURATION

Configuration steps for BS41x, including power-up, IP address setup, transceiver addition, diversity, synchronization, and frequency adjustment.

2.8 COMMON SETTINGS FOR BS41 X AND SB421

2.9 NETWORK MANAGEMENT INSTALLATION

2.10 DISPATCHER INSTALLATION

2.11 LOG SERVER

2.12 VOICE GATEWAY

2.13 PACKET DATA GATEWAY

2.14 APPLICATION GATEWAY

2.15 TERMINAL GATEWAY

2.16 TETRAOM

Guide to using TetraOM for Base Station communication and control, including commands, parameters, and setup.

PART-3: TetraFlex Applications

3.2 BASE STATION CONTROLLER

3.3 NETWORK MANAGEMENT

Detailed explanation of the TetraFlex Network Management application, including its components, toolbar, and menus.

3.5 DISPATCHER

Information about the Dispatcher application, its core elements, functionality, and setup requirements.

PART-4: TECHNICAL REFERENCES

4.1 ANTENNA SYSTEM FOR BS41 X

4.2 TX COMBINER FOR BS41 X

4.3 RX MULTI COUPLER FOR BS41 X

4.4 TR412 TRANSCEIVER DESCRIPTION

Detailed description of the TR412 Transceiver, including receiver, transmitter, reference oscillators, DSP, and Micro Controller.

4.5 RX DIVERSITY FOR BS41 X

4.6 POWER SUPPLY FOR BS41 X

4.7 BATTERY TEST SB421

ABBREVIATIONS; DEFINITIONS

DAMM TetraFlex BS414 Specifications

General

Brand	DAMM
Model	TetraFlex BS414
Category	Receiver
Language	English