To Next PageTo Next Page
Need help?Do you have a question about the DAMM TetraFlex BS421 and is the answer not in the manual?
Details the installation procedure for the SB421 Service Box.
Details the installation procedure for the BS421 Base Station.
Details the installation procedure for the BS41x Base Station.
Provides steps to change the BS421 IP address by editing the dhcpsrv.ini file.
Explains IP address setup in BSC412 Windows settings.
Details how to add a TR412 Transceiver to the BSC.
Details setting main parameters like Description, LAN/WAN IP addresses.
Explains how to set TX power level for transceivers using BSC-GUI or BSS-Tab.
Details the installation process for the Dispatcher on a separate PC.
Details database backup and cleanup procedures for the Log Server.
Guides on configuring the Packet Data gateway using NM, BSC GUI, or TetraOM.
Describes the API, its DLL, and its functions for connecting applications.
Explains how to configure the system for API to work.
Details physical connection of outdoor/SB421 and indoor/BS41x units to the backbone.
Details the IP interconnection scheme for TetraFlex® per site, including address assignments.
Provides a general system description for TetraFlex® V7.6.
Describes the Base Station Controller and its software.
Introduces the Network Management application and its execution.
Describes the Dispatcher application, its core elements, and requirements.
Explains the Dispatcher application's development platform and requirements.
Details the fields for adding a new subscriber.
Details configuration for Application subscribers, including Pin Code and Authentication.
Details fields for group subscribers, including Group Text.
Describes the function of the Security Key Set for authentication and encryption.
General| Frequency Range | 380-430 MHz |
|---|---|
| Channel Bandwidth | 25 kHz |
| Channel Spacing | 25 kHz |
| Modulation | π/4 DQPSK |
| Sensitivity | -116 dBm |
