To Next PageTo Next Page
Need help?Do you have a question about the DAMM TetraFlex SB421 and is the answer not in the manual?
Covers installation requirements, placement, and grounding for SB421.
Covers installation requirements, placement, and grounding for BS421.
Covers installation requirements, placement, and grounding for BS41x.
Discusses threats and measures for protecting the DAMM system from viruses.
Covers initial setup procedures for SB421, including Ethernet connection.
Explains the BS421 Ethernet connection requirements and purpose.
Covers IP address setup for BSC412 Windows settings, LAN, and WAN.
Details how to set main parameters like Description, LAN/WAN IP addresses via GUI or OM.
Explains how to set the desired TX power level for transceivers using BSC-GUI or OM commands.
Outlines the prerequisite and steps for installing the Dispatcher on an external PC.
Details the USB license dongle requirements for running the TetraFlex® Log Server.
Details how to perform scheduled and manual maintenance for the log server database.
Describes the configuration steps required to set up the system for SIP operation.
Details how to configure the Packet Data gateway using NM, BSC GUI, or TetraOM.
Details the steps for setting up a VNC connection to the BS421.
Describes the physical connections for outdoor (SB421) and indoor (BS41x) units to the backbone.
Recommends IP addressing schemes for nodes, routers, and multicast segments.
Details the Base Station Controller (BSC.exe) and its functions.
Introduces the Network Management application and its interface.
Describes the BSC.exe Node Software, its service, and supported functions.
Describes the Network Management application and how it may be executed.
Introduces the Dispatcher application, its core components, and API.
Details the requirements and functionality for launching the Dispatcher application.
Describes how to read and edit the Subscriber Register in the Dispatcher.
Explains the CAD service for verifying call requests and restricting radio traffic.
Explains how emergency calls are indicated and handled in the Voice call window.
Details the installation process for the Group Bridge software on a PC.
Details the dual diversity system implementation, signal paths, and DSP processing.
General