EasyManua.ls Logo

Danby DDR060BMP2WDB - TROUBLESHOOTING; Appliance Issues; Specific Problems

Danby DDR060BMP2WDB
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
16
Appliance will not operate
Plug is not fully inserted into the wall outlet
Blown fuse or circuit breaker
Ambient humidity is lower than the set humidity
Bucket is full or is not in the proper position
Insufficient dehumidifying
Air filter is dirty
Blocked air flow
Appliance size is too small for application
Ambient humidity is lower than the set humidity
Noise
Air filter is dirty
Bucket is not in proper position
Floor surface is not level
Odors
Formation of mold or mildew on internal wet surfaces
Place an algaecide tablet in the water bucket
Water on floor
Hose connection is loose
Drain cover has been removed
Frost build up
When ambient temperature is below 5°C (41°F) frost may form
The appliance will defrost automatically during which the compressor temporarily shuts off while the
fan continues to operate. Once the defrost process is finished, the appliance will resume its previous
operational settings

Related product manuals