To Next PageTo Next PageWhat to do if my Danby DDR070BDWDB Dehumidifier will not operate?
If your Danby Dehumidifier isn't operating, ensure it's fully plugged into the wall outlet. Also, check the fuse or circuit breaker and replace or reset if necessary. Make sure the ambient humidity is at least as high as the set humidity. Finally, empty the bucket or reposition it correctly.
Why is there water on the floor near my Danby DDR070BDWDB Dehumidifier?
If you find water on the floor near your Danby Dehumidifier, try tightening the hose connection. If that doesn't solve the problem, make sure the drain cover is properly reattached.
What to do if there is frost build up in my Danby DDR070BDWDB?
If frost builds up in your Danby Dehumidifier, especially when the ambient temperature is below 5°C (41°F), switch the appliance to fan-only mode. Continue running it in this mode until the frost melts.
How to improve dehumidifying of my Danby Dehumidifier?
If your Danby Dehumidifier isn't dehumidifying sufficiently, start by cleaning or replacing the air filter. Ensure that nothing is blocking the airflow around the unit. If the problem persists, consider using a larger dehumidifier suitable for the room size. Also, verify that the ambient humidity is at least as high as the set humidity.
How to get rid of odors from my Danby Dehumidifier?
To address odors coming from your Danby Dehumidifier, place an algaecide tablet in the water bucket. This will help prevent the formation of mold or mildew on internal wet surfaces, which is often the cause of the odor.
How to reduce noise from Danby DDR070BDWDB?
To reduce noise from your Danby Dehumidifier, begin by cleaning or replacing the air filter. Make sure the bucket is correctly positioned. If the noise continues, check if the floor surface is level and adjust as needed.
General| Model | DDR070BDWDB |
|---|---|
| Energy Star Rated | Yes |
| Noise Level | 51 dB |
| Auto Restart | Yes |
| Continuous Drain Option | Yes |
| Coverage Area | 4500 sq. ft. |
| Automatic Defrost | Yes |
| Filter Type | Washable filter |
| Moisture Removal | 70 pints per day |
| Operating Temperature | 41°F - 95°F |
| Power Supply | 115V/60Hz |
| Color | White |
| Defrosting | Automatic |
| Capacity | 70 US Pints |
| Warranty | 24 months parts and labor coverage with in-home service |
Improper grounding plug connection risks fire, electric shock, or injury to persons.
Proper grounding prevents electrical shock; use a three-prong plug and a properly grounded outlet.
Lists common error codes (AS, ES, P2, EC, E3) and provides specific troubleshooting steps.
Checks power, fuses, bucket position, and potential time delays when the dehumidifier does not start.
Addresses restricted airflow, dirty filters, incorrect settings, or environmental factors affecting drying.
