1
FEATURES OF YOUR
WINE COOLER
1) Tempered Glass Door: Tinted for UV protection while still
allowing for easy interior viewing.
2) Electronic Display and Controls: For viewing and
regulating the temperature of the wine cooler.
3) Magnetic Door Gaskets: Tight fitting seals retain all the
cooling power and humidity levels.
4) Wire Wine Racks.
5) Leveling Leg.
6) Interior Light (not shown): Illuminates the compartment
when the door is opened.
THE CONTROLS OF
YOUR WINE COOLER
OPERATING INTRUCTIONS
2
3
4
5
4
1) “DOWN” BUTTON: (Cooler) Used to decrease the
temperature in 1° degree increments.
2) “UP” BUTTON: (Warmer) Used to raise the temperature
in 1° degree increments.
3) TEMPERATURE DISPLAY: Display screen shows the
temperature.
4) F° / C° BUTTON: Used to switch between the
Fahrenheit and Celsius scales. Adjacent indicator lights
denote which scale of temperature is displayed.
5) INTERIOR LIGHT TOGGLE SWITCH: Manually
illuminate or extinguish exterior light.
SETTING THE
TEMPERATURE
Important: In the event of a power failure, wait 3 to 5 minutes before restarting.
• To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the ‘Set Upper’ and ‘Set
Lower’ control buttons simultaneously for approximately five (5) seconds.
• The temperature range can be set as low as 42.8°F (6°C) or as high as 57.2°F (14°C) to suit your specific
wine storage requirements. Each depression of the ‘Set Upper’ or ‘Set Lower’ button will allow you to adjust
the temperature in 1° increments within the aforementioned range.
• You may view your ‘set’ temperature at any time by briefly depressing either the ‘Set Upper’ or ‘Set Lower’
button. The set temperature will flash in the display area for 5 seconds before the display resumes showing the
current cabinet temperature.
To Next Page
Loading...
Need help?
General
