Need help?Do you have a question about the Danby DIM1524 and is the answer not in the manual?
General| Type | Portable Ice Maker |
|---|---|
| Voltage | 115V |
| Control Type | Electronic |
| Refrigerant | R134a |
| Ice Cube Size | Small, Medium, Large |
Details the functions of the Electronic Display, Power, Ice Size Selector, Increase, and Decrease buttons.
Symbols indicating selected ice cube size: small, medium, or large.
Symbols for Timer, Power, Bucket Full, Add Water, Fault, and Pump status.
Addresses issues with dirty sensors or bad photoelectric diodes causing a false 'ice full' state.
Explains clogged/bad water sensors and recommends self-clean with vinegar mix.
Explains the fault symbol indicates functional interruptions in fill, refrigeration, or harvest modes.
Describes the step-by-step process of the ice maker's normal cycle from filling to harvest.
Troubleshooting a water tray that gets stuck during its first movement, checking hinges and clearance.
Identifies causes for tray stalling not related to the ice tray, such as motor or hinge failure.
Diagnoses issues where the tray completes its cycle but receives no water, checking pump and circuit board.
Addresses water filling the tray but stopping prematurely, suggesting self-clean and diode checks.
Steps to diagnose a compressor that does not start during the refrigeration cycle.
Lists potential causes for tray jamming like low temperature, damaged prongs, or low refrigerant charge.
To Next Page
