Dancing Wings Hobby J-3 User Manual

J-3
Instruction Manual
BALSA WOOD AIRPLANE
Suggested Equipment
Motor: 2212 1100KV
Propeller: 9-10 inch
ESC: 20A
Servos: 9g*4
Battery: 3s 2200-2600mAh
Radio: ≥4CH
Speci�ication
Wingspan: 1180mm
Length: 700mm
Flying Weight≈600g
V 3.0
R
L
D
O
B1
B1
B8
B2
B3
B6
B4
B5
B7
B9
B9
B10
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20 B20
B15
B22
B23R B23L B23D
B24
B25
B26
B27
B28
B29
Tool needed：Accessories include：
2mm Plywood
1

Dancing Wings Hobby J-3 Specifications

General

Brand	Dancing Wings Hobby
Model	J-3
Category	Toy
Language	English

Summary

Fuselage Assembly

Fuselage Frame Construction

Gluing side plates and balsa strips to form the fuselage structure.

Firewall and Rear Structure

Assembling the firewall board and balsa strips for the fuselage rear.

Fuselage Bottom and Motor Mount

Attaching the fuselage bottom and motor mounting base.

Motor Installation

Mounting the motor onto the base and fuselage.

Wing Assembly

Wing Spars, Ribs, and Upper Cover

Assembling wing spars, ribs, and gluing the upper wing cover.

Wing Reinforcement and Shaping

Adding reinforcement pieces and shaping the wing's leading edge.

Wing Tips and Joining

Attaching wing tips and joining the two wing halves.

Tail Wing and Landing Gear Assembly

Tail Wing Construction and Rudder

Assembling the tail wing, rudder, and connecting with paper hinges.

Landing Gear Installation

Installing the landing gear onto the fuselage.

Components and Power Installation

Servo and Control Rod Connections

Connecting servos, horns, and pull rods for control surfaces.

Wing Attachment and Windshield

Fixing the wing to the fuselage and installing the windshield.

Battery Hatch and Cowling

Installing the battery hatch and assembling the cover and cowling.

Additional Safety Precautions and Warnings