Dancing Wings Hobby Sunbird - Fuse Assembly: Attaching Bottom Board; Fuse Assembly: Cabin Cover; Fuse Assembly: Cover and Servo Mount; Wing and Tail Assembly Steps

Sunbird
Instruction Manual
V2.0
Balsawood Airplane
F9
F9
F12
F11
F10
F8
F4
F16
F13
Magnet
Magnet
Assemble the tail as per the 1:1 plan,and take care of the straightness of the tail.
Paste the finished board (picture
1.5 above) at the bottom of the
fuselage.
Assemble the cabin cover as
picture shown left.
Paste the cover F4 and F8 as
picture shown left,paste the
servo mount base F16.
Assemble the vertical and horizontal tail at the tail of
the fuselage,connect the two ailerons with U-shape
steel wire.
1.6
1.7
1.8
2.1 2.2
2.3
U-shape steel wire
2.Assembly of Wing and Tail