9.1 Z5710.xxx d&b ArraySight sets
In connection with d&b flying frames other than the SL-Series flying
frames, d&b also provides additional ArraySight sets including
dedicated flying frame adapter to allow the d&b ArraySight
sender unit to be mounted to the corresponding flying frame.
The following sets are covered by this manual
(Mounting instructions):
▪ Z5710.001: d&b ArraySight set J-Series
▪ Z5710.002: d&b ArraySight set V-Series
Apart from any other items, each ArraySight set includes the
mechanical components (flying frame adapter) for two flying
frames.
Please verify the shipment for completeness and proper condition
of the items.
Tools required
▪ Torx screw driver T20
▪ Torx screw driver T25
▪ Socket wrench SW8
9.1.1 Z5710.001 Mounting instructions
Scope of supply
Pos.
Qty. d&b Code Description
1 Z5710.001 d&b ArraySight set J-Series
Including:
[1] 2 Z5711 ArraySight sender unit
[2] 2 J Flying frame adapter
[3] 4 Panhead screw (Torx T20)
M4 x 12
[4] 8 Panhead screw (Torx T25)
M5 x 18
[5] 8 Self securing nut M5
[6] 2 K6006.200.00 Shielded CAT5e 1:1 cable,
30 m (100 ft)
[7] 1 Z5712 ArraySight meter unit
within transport case
1 D2735.EN .01 ArraySight Manual
9 Appendix
d&b ArraySight Manual 1.7 en 25
To Next Page
Loading...
Need help?
General