Need help?Do you have a question about the d&b audiotechnik D6 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Amplifier Technology | Class D |
| Damping Factor | > 200 |
| Analog Inputs | 2 x XLR |
| Output Connectors | Speakon NL4 |
| Frequency Response | 20 Hz - 20 kHz |
| THD+N | < 0.1 % |
| Total Harmonic Distortion | < 0.1 % |
| Input Impedance | 10 kOhms |
| Input Connectors | XLR |
| Height | 88 mm |
| Power Supply | 100-240 V, 50/60 Hz |
Diagram illustrating the structure and signal flow of the DSP software.
Visual representation of the software's menu hierarchy for navigation.
Details on the LCD display, rotary encoder, and conventions for menu navigation and control.
Information on what is shown during device startup and the main operational screen.
Configuration options for inputs, channels, and general device parameters.
Procedures for checking system condition, calibrating, and monitoring loudspeaker loads.
Storing and recalling device configurations using preset memories.
Setting up remote operation via dbCAN and locking the front panel controls.
Adjusting display contrast, backlight, and accessing device information.
Features for monitoring analog or digital inputs and signal presence.
Instructions for resetting the device to factory default settings.
Software for archiving firmware files for amplifier updates.
Procedure for updating firmware using the dbUpdate software via USB.
Method for updating firmware on multiple amplifiers using the d&b Remote network.
To Next Page
