d&b audiotechnik SL Series - Technical Specifications Data

2.5 Technical specifications
System data
Frequency response (–5 dB standard) 54 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 75 Hz - 18 kHz
Max. sound pressure (1 m, free field)
KSL8 145 dB
KSL12 144 dB
(SPLmax: Broadband signal IEC 60268)
Loudspeaker data
Nominal impedance front LF
8 ohms
Nominal impedance side LF/MF/HF 8 ohms
Power handling capacity front LF (RMS/peak 10 ms)
450/1800 W
Power handling capacity side LF/MF/HF (RMS/peak 10 ms)
250/1000 W
Nominal dispersion angle (horizontal) KSL8/KSL12 80°/120°
Splay angle setting 0 ... 10° (1° increment)
Components 2 x 10" front LF driver
2 x 8" side LF driver
1 x 8" MF driver
2 x 1.4" exit compression driver with 3" coil
Passive crossover network
Connections NLT4 F/M
Pin assignment 1+: Front LF+/1–: Front LF–
2+: Side LF/MF/HF+/2–: Side LF/MF/HF–
Weight 58 kg (128 lb)
KSL8: Frequency response*, Standard and CUT modes
*single cabinet within array
KSL12: Frequency response*, Standard and CUT modes
*single cabinet within array
d&b KSL8/KSL12 Manual 1.2 en10