D&B E12 - Technical Specifications

2.5. Technical specifications
E12/E12-D system data
Frequency response (–5 dB standard mode) 50 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 100 Hz - 18 kHz
Max. sound pressure (1 m, free field)
with D6/10D/E-PAC 131/130 dB
with D12/D20/30D 134/133 dB
with D80 134/133 dB
(SPLmax peak, pink noise test signal with crest factor 4)
E12/E12-D loudspeaker
Nominal impedance
8 ohms
Power handling capacity (RMS/peak 10 ms) 300/1600 W
Nominal dispersion angle (hor. x vert.) 80° x 50° (E12)
110° x 50° (E12-D)
Components 12" driver with neodymium magnet
coaxial 1.3" exit compression driver with 3" coil and rotable CD horn
Passive crossover network
Connections NLT4 F/M
Optional: 2 x EP5
SC option: 2 x NL4 M
WR option: Fixed cable 5.5 m (18 ft) H07-RN-F 2 x 2.5 mm
2
/AWG 13
Pin assignments NLT4 F/M: 1+/1–
EP5: 1+/2–
Fixed cable: Brown + / Blue –
Weight 16 kg (35 lb)
E12 frequency response, standard and CUT modes.
E12-D frequency response, standard and CUT modes.
d&b E12/E12-D Manual 2.1 en10