D&B E12 - Operation

2.3. Operation
NOTICE!
Only operate d&b loudspeakers with a correctly configured d&b
amplifier, otherwise there is a risk of damaging the loudspeaker
components.
Applicable d&b amplifiers:
D80/D20/D12/D6/10D/30D.
Standard operation
Application Setup Cabinets per
channel
E12 E12 2
E12-D E12-D 2
For applicable d&b amplifiers, the controller setups are available
in Dual Channel and/or Mix TOP/SUB mode. For combinations
with active subwoofers fed by a single 4-wire cable Mix TOP/SUB
mode must be selected.
Passive operation
Application Setup Combination per
channel
E12
with E15X-SUB
E12-X 1
E12-D
with E15X-SUB
E12-DX 1
In Dual Channel mode, the "X" setup can be selected to drive the
cabinet in combination with the E15X subwoofer on the same
channel.
The setup provides a dedicated correction for the combined
frequency response of the system.
d&b E12/E12-D Manual 2.1 en6