D&D Technologies MAGNALATCH RE-KEYING SOP User Manual

MAGNALATCH RE-KEYING SOP
PIS010 27/03/2014
To remove Lock cylinder
1. Remove security screw (Torx T10 Driver) and front cover
Important – MAGNALATCH must be unlocked with no key in Lock cylinder
To remove Lock cylinder
2. Remove lock cylinder and lock chassis
“Important – MAGNALATCH must be unlocked with no key in Lock cylinder”

D&D Technologies MAGNALATCH RE-KEYING SOP Specifications

General

Brand	D&D Technologies
Model	MAGNALATCH RE-KEYING SOP
Category	Locks
Language	English

Summary

MAGNALATCH RE-KEYING SOP

To remove Lock cylinder

Steps to remove the security screw, front cover, lock cylinder, and lock chassis using a Torx T10 driver.

To re-install lock cylinder

Procedure to re-install the lock cylinder, ensuring the lock tail is vertical before insertion.

To Test lock function

Instructions to test the lock function by inserting and turning the key to check the red lock indicator.