9
Connect the decoder wires accordingly to the following diagram:
red wire with the right track wire (G1)
black wire with the left track wire (G2)
orange wire with the motor wire, which was connected to the right track (M1)
gray wire with the motor wire, which was connected to the left track (M2)
white wire with the front light (LV)
yellow wire with the rear light (LR)
In addition for SUSI interface (only if available):
red wire SUSI supply voltage (ZVS)
blue wire SUSI clock (ZCLK)
gray wire SUSI data (ZDAT)
black wire SUSI ground (GND)
To Next Page
Loading...
