DANE-ELEC SO G-STREAM User Manual

9
3) Connection and setup of network
The So G-Stream can play the files stored in the PC directly through network. Please connect the
RJ45 cable according to the following illustration. The network connects well when the LED of
network status and W/R blinks.
Connect one end of the RJ45 cable to the So G-Stream like the PC does and connect the video
output. Press “setup” key or select “setup” menu in the initiation interface. Select “Network”
option in the setup window and press “ENTER” to confirm. It is available for both automatic
and manual IP setup. Press “setup” key again to exist after setup. Before access the PC through
network by the So G-Stream, the media files must be shared in the network.
OPERATION OF FILE SHARING UNDER WINDOWS XP
Two conditions are necessary for a successful play of network connection:
1. Folder sharing and safety setup.
2. Set the same gateway and subnet mark address.
Procedure of file sharing under Windows XP:
1. Select the folder need to be shared, right click mouse and select the option” Sharing and
safety”, lift click the mouse.

DANE-ELEC SO G-STREAM Specifications

General

Brand	DANE-ELEC
Model	SO G-STREAM
Category	Media Player
Language	English