15
Programming the unit - 24 hour mode
Programming event times in 24 hour
mode
You can programme your heating and hot water to
come on and go off up to 3 times each day, to suit your
requirements.
Press PROGRAMME until 1
(Event 1) shows along the top
of the display.
Use the + and - buttons to set
the time you want your system
to fi rst come on in the morning
Press PROGRAMME again to move to the next step
(Event 2)
Use the + and - buttons to set the time you want your
system to fi rst go off.
Continue using the PROGRAMME and +/- buttons
in this way to set the ON/OFF times for events 3-6
(2nd ON/OFF & 3rd ON/OFF).
NB. It is not possible to programme times out of
sequence.
If you do not press a button at all for 3 or 4 minutes the
unit will automatically return to RUN mode.
1
To Next Page
Loading...
