Danfoss 102E5

17
Running your programme
The 102E5 will either control your hot water and heating
together, or just your hot water (i.e. during the summer,
when heating is no longer required).
To make your selection use the rocker switch under
the LCD display to select either WATER/HEATING or
WATER ONLY
To run the central heating and/or hot water programme
press the SELECT button.
As you press SELECT a bar on the display will move
between ON, OFF, ALLDAY and AUTO
 ON = the hot water/heating will remain on
constantly
OFF = the hot water/heating will not come on
AUTO = the hot water/heating will come on
and go off according to the programmed times
ALLDAY = the unit will come on at the fi rst
programmed ON and will remain on until the last
programmed OFF
Select the option you require, depending on your
circumstances, time of year, etc.


O
N
= the hot water
/
heatin
g
will remain on
constantl
y


 OFF = the hot water/heatin
g
will not come o
n



A
UTO = the hot water
/
heatin
g
will come on
and
g
o o
ff
accordin
g
to the pro
g
rammed times



A
LLDA
Y
= the unit will come on at the fi rst
Y
pro
g
rammed
O
N and will remain on until the last
pro
g
rammed
O
FF
RUN mode