Danfoss APP 1.5 User Manual

4
180R9267 / IOM APP 1.5-3.5 Appendices - v04 / 11.2013
Data sheet APP pumps - APP 1.5-3.5
2
521B0850 / DKCFN.PD.013.FA6.02 / 09.2012
APP 1.5, APP 1.8, APP 2.2, APP 2.5, APP 3.0 and
APP 3.5 pumps are designed to supply low
viscosity and corrosive uids under high
pressure, e.g. in seawater reverse osmosis
ltration applications and for high-pressure
saltwater pumping.
The pumps are based on the axial piston
principle enabling a very light and compact
design. The design ensures that lubrication of
the moving parts in the pumps is provided by
the uid itself. No oil lubrication is thus required.
All parts included in the pumps are designed to
provide long service life, i.e. long service life with
a constantly high eciency and minimum of
service required.
The pumps are xed displacement pumps in
which the ow is proportional to the number of
revolutions of the input shaft and the pump
displacement, regardless of any counter- pressure.
The pumps are supplied with an integrated
ushing valve that allows the salt water to ow
from inlet to the outlet, when the pump is not
running.
Data sheet for
APP 1.5-3.5 pumps
(521B0850)
Table of Contents
1. General information
1. General information
2. Benets
3. Technical data
4. Flushing valve
5. Flow at dierent rpm
6. Power requirements
7. Temperature and corrosion
7.1 Operation
7. 2 Storage
8. Noise level
9. Filtration
10. Dimensions
10.1 Pump
10.2 Complete unit
11. Installation
11.1 Mounting
11. 2 Open-ended system with direct water supply
11. 3 RO system with APP pump
12. Service
12.1 Warranty
12.2 Maintenance
12.3 Repair
1: Shaft sealing
2: Mounting ange
3: Retaining ring
4: Piston/shoe
5: Valve plate
6: Swash plate
7: Cylinder barrel
8: Spring
9: Port plate
10: Connecting ange
11: Housing with bearing
12: Flushing valve
521B0850 DKCFN.PD.013.FA6.02 03-2010
DATA SHEET
Water Pumps
APP1.5 - 3.5
1. General information
APP1.5, APP1.8, APP2.2, APP2.5, APP3.0 and APP3.5 pumps are designed to supply low viscosity and corrosive fl uids under high
pressure, eg in seawater reverse osmosis fi ltration applications and for high-pressure salt water pumping.
The pumps are based on the axial piston principle enabling a very light and compact design. The design ensures that lubrication of
the moving parts in the pumps is provided by the fl uid itself. No oil lubrication is thus required.
All parts included in the pumps are designed to provide long service life, ie long service life with a constantly high effi ciency and
minimum of service required.
The pumps are fi xed displacement pumps in which the fl ow is proportional to the number of revolutions of the input shaft and the
pump displacement, regardless of any counter-pressure.
The pumps are supplied with an integrated fl ushing valve that allows the salt water to fl ow from inlet to the outlet, when the pump
is not running.
2. Benefi ts
• One of the smallest and lightest pumps on the market.
• Can be powered by a combustion engine.
• Long service life / No preventive maintenance required in the warranty period.
• Generates insignifi cant pulsations in the high-pressure line.
• No oil lubricant required.
• Integrated fl ushing valve
• All parts of the pump are made of high corrosion resistant materials eg Duplex (EN1.4462/UNS S31803-S32205) and
Super-duplex (EN1.4410/UNS S32750) stainless steel and carbon reinforced PEEK
• High effi ciency
1: Shaft sealing
2: Mounting fl ange
3: Retaining ring
4: Piston/shoe
5: Valve plate
6: Swash plate
7: Cylinder barrel
8: Spring
9: Port plate
10: Connecting fl ange
11: Housing with bearing
12: Flushing valve
2
1
12
7
11
4
6
11
9
10
5
8
3

Danfoss APP 1.5 Specifications

General

Brand	Danfoss
Model	APP 1.5
Category	Water Pump
Language	English