Danfoss DHP-A

Menu selection Meaning Factory setting
FAN H OFF AT High speed is deactivated at this temperature and low speed is
activated.
12°C
(range: 10°C / 20°C)
DEFROST CURVE Used to change the angle of the defrost curve using + or–
(Change the start temperature for defrost).
-10°C
(range: -13°C / -7°C)
MANUAL DEFR Used to perform a manual defrost. Started using + or -. 0
(range: 0 / 1)
8.7 Sub-menu LANGUAGE
Table 15. Used to set the language of the menu system.
Menu selection
SVENSKA
ENGLISH
DEUTSCH
NEDERLANDS
FRANÇAIS
ESPAÑOL
ITALIANO
NORSK
DANSK
SUOMI
EESTI
POLSKI
ČEŠTINA
50 – Installation instructions VMBMA1002