Danfoss DHP-H Varius Pro+ User Manual

Two heat pumps, setting up primary and secondary functionality
On the secondary unit, go to the network settings menu and configure the machine to
be on the same subnet.
Finally, in the "primary/secondary" menu, configure the secondary unit.
No external network connection to the system. Ethernet cable: Standard Cat 5 network cable, RJ 45.
1 2
1. Primary (controlling) heat pump with IP address e.g. 192.168.0.100
2. Secondary heat pump with IP address e.g. 192.168.0.102
The secondary heat pump must always point to the primary heat pump IP address.
More than one secondary heat pump
3 4 5 6
1
2
8
7
1 Router/Switch
2 Possibility of internet access via router
3 Primary (controlling) heat pump with IP address e.g.
192.168.000.100
4 Secondary heat pump with IP address e.g. 192.168.000.102
5 Secondary heat pump with IP address e.g. 192.168.000.103
6 Secondary heat pump with IP address e.g. 192.168.000.104
X Secondary heat pump with IP address e.g. 192.168.000.XXX
7 Online Web server and database
8 Online web browser
The secondary heat pump must always point to the primary heat
pump IP address.
Commissioning
DHP-H Varius Pro+/DHP-L Varius Pro+
VIJSG202 Danfoss Heating Solutions
20

Danfoss DHP-H Varius Pro+ Specifications

General

Brand	Danfoss
Model	DHP-H Varius Pro+
Category	Heat Pump
Language	English