Need help?Do you have a question about the Danfoss EKC 202 and is the answer not in the manual?
General| Power Supply | 24 V AC/DC |
|---|---|
| Relay Outputs | 2 |
| Analog Inputs | 2 |
| Digital Inputs | 2 |
| Enclosure Rating | IP20 |
| Output | Relay |
| Hysteresis | Adjustable |
| Mounting | DIN rail |
| Communication | RS485 |
| Application | Refrigeration |
| Type | Electronic temperature controller |
| Sensor Type | Pt 1000 |
| Protection Class | II |
| Ambient Temperature Range | -10 - 55°C |
Details controller use in refrigeration, cold rooms, and its basic operational principle.
Highlights integrated functions, IP65 rating, digital inputs, programming, HACCP, and calibration.
Various methods to start defrost: interval, time, manual, S5-temp, schedule, network.
Using digital input for door contact, defrost start, regulation control, and case cleaning.
Step-by-step guide for cleaning the refrigeration appliance.
Automatic defrost based on refrigeration time or S5 temperature.
Understanding the controller's display and light-emitting diodes (LEDs) for status.
How to operate buttons, navigate menus, and interpret defrost indications.
Lists and explains fault (E-codes), alarm (A-codes), and copying errors.
Interpreting fault (E-codes), alarm (A-codes), and copying errors.
Setting the importance level for individual alarms (0, 1, 2, or 3).
Recommended parameters c01 and c02 for preventing compressor breakdown.
Setting minimum ON and OFF times for compressor operation.
Selecting defrost sensor and initiating defrost based on time or S5 temperature.
To Next Page
