Need help?Do you have a question about the Danfoss EKC 202D and is the answer not in the manual?
General| Type | Electronic temperature controller |
|---|---|
| Digital inputs | 2 |
| Analogue inputs | 2 |
| Enclosure Rating | IP65 |
| Housing material | Plastic |
| Application | Refrigeration |
| Relay Outputs | 2 relays |
| Output | Relay: Max. 8 A (resistive load) |
| Communication Interface | Optional (RS485) |
| Mounting | Panel mount |
| Input Voltage | 230 V AC, 50 – 60 Hz or 12 - 24 V AC/DC |
Details the connection and use of thermostat and defrost sensors (S3, S4, S5).
Explains the configurable functions for digital inputs DI1 and DI2.
Covers various defrost methods (Natural, Electric, Brine) and start triggers.
Details the controller's use in small refrigeration systems and coldrooms.
Details alarm settings, delays, and compressor operation parameters.
Covers defrost methods, timing, drip-off, and fan control settings.
Lists and explains specific error messages (A-alarms, E-alarms) and their causes.
Provides steps for quickly starting the controller's regulation process.
Details supply voltage, sensor types, accuracy, display, and digital input requirements.
To Next Page
