Danfoss FP715 Si User Manual

21
1. Press PROG once until SET CH
ON TIME appears at the top of
the display and MOTUWETHFR
appears at the bottom of the
display.
Use the + or - buttons to set
the time you would like your
heating to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your heating to
go off (Event 2).
To move to the next setting, i.e. when you would like your
heating to come on again (Event 3) press the NEXT ON/
OFF button again.
3. Continue programming the central heating ON and OFF
times for weekday Events 4, 5 & 6 as in Step 2.
DAY/HOL
DAY/HOL
DAY/HOL
Programming the heating in 5/2 day mode
Programming heating - 5/2 day mode

Danfoss FP715 Si Specifications

General

Battery Backup	Yes
Display	LCD
Operating Mode	Heating
Number of Channels	1
Switching Current	3A
Protection Class	IP30
Type	Programmer
Program	7-day, 5/2-day, or 24-hour
Switch Rating	3 A (resistive)
Temperature Range	5 to 30°C
Power Supply	230V AC
Output Type	Relay
Control Algorithm	On/Off
Operating Temperature	0 to 40°C