To Next PageTo Next Page
Need help?Do you have a question about the Danfoss MT and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | MT |
| Category | Air Compressor |
| Language | English |
Details the scope of instructions for Maneurop® MT, MTZ, VTZ & NTZ compressors, covering safety and proper usage.
Covers careful handling, upright storage, temperature limits (-35°C to 50°C), and protection from elements.
Emphasizes using HFC-compatible equipment, proper brazing, and avoiding contaminants during assembly.
Prohibits oxygen/dry air and dye for leak detection, recommending system leak tests with nitrogen.
Instructs on using a vacuum pump, achieving 500 µm Hg pressure, and avoiding megohmmeters during vacuum.
Details isolating power, wiring, internal overload protection, and compliance with local electrical standards.
Guides on filling refrigerant in liquid phase, charge limits, and preventing liquid flood-back.
Ensures safety devices are operational and settings do not exceed service pressure limits.
Covers opening service valves, ensuring prompt start, checking wiring, and overload protector reset.
Recommends checking current, voltage, suction superheat, oil level, vibration, and refrigerant charge.
Includes verifying safety devices, leak tightness, current draw, electrical connections, and compressor cleanliness.
Outlines conditions that may void the warranty, such as absence of nameplate or non-approved refrigerants.
Advises recycling of compressors and compressor oil through suitable companies.
