Danfoss RET1001M User Manual

Danfoss Heating Solutions VISUM14F 5
RET1001M Room Thermostat
3. Control type setting
Move link to required position.
Load Compensation Control – energy saving feature
which res the boiler at regular intervals to maintain a
set temperature, achieving a constant ambient environ-
ment for the user. (factory default)
ON/OFF Control – boiler is switched ON when below
set temperature and OFF when above.
Installation Guide
EN
Load Compensation Control
ON/OFF Control

Danfoss RET1001M Specifications

General

Brand	Danfoss
Model	RET1001M
Category	Thermostat
Language	English