Danfoss RET2001 User Manual

User Guide RET2001 Digital Room Thermostats
2
Danfoss Heating
VUSUD102 08/2020
1 LCD Overview
Symbols Function description Symbols Function description
Parameter number
insetup
Frost protect active
Room temperature Away mode
Temperature indication
RF Status
(RET2001RF only)
SET
Set temperature
Battery low indicator
(RET2001B & RET2001RF
only)
Heating active
2 Buttons
Symbols Function description
Power on/o
M
Mode change / option
setting
< >
Temperature / option
setting selectors
3 Power ON/OFF
Turn the thermostat ON or OFF (Standby) by pressing .
4 Setting the Temperature
• Press < or > at any time to change the desired temperature value. SET is shown in the display.
• When releasing < or >, the display returns to showing the actual temperature.
• The adjustment step is 0.5 °C.
5 Select Away Mode
• Press M to enter Away mode and will be displayed.
• Away mode temperature can be set in parameter settings, P07.
• Press M again to exit Away mode.

Danfoss RET2001 Specifications

General

Control Type	On/Off
Protection Class	IP30
Type	Room Thermostat
Temperature Range	5°C to 30°C
Power Supply	230V AC
Mounting	Wall mounting