VISUO14F Danfoss Heating Solutions6
RET2001M & TP5001MInstallation Guide
EN
4. Technical Specifications
Specifications RET2001M / TP5001M
Operating Product is designed
for continuous use
Operating Voltage 230 Vac ± 10 % 50/60 Hz
Output Volt free
Setting temperature range 5 °C to 35 °C
Operating temperature
range
0 °C to 40 °C
Switch rating 3 A (1) at 250 Vac
Switch type 1x SPDT Type 1B
Terminals 1 to 2.5 mm wires
IP rating IP30 (installed)
Load compensation
control
Yes
On/off control Yes
ErP class Class IV, efficiency gain 2 %
Construction EN60730-2-9
Control pollution situation Degree 2
Rated impulse voltage 4 kV
Ball pressure test 75 °C
Dimensions H86 x W86 x D30
Software classification A
Running and setting
accuracy (for thermostats
with build in timer)
Setting resolution
1 minute. Accuracy
+/- 1 minute per month.
To Next Page
Loading...
