Danfoss Termix VVX-I-R FI - 7 Series - Lifting Instructions

© Danfoss | 2021.06| 9LGB40450
Termix VVX-I-R FI - 7 Series DS fully insulated
Temporarily remove the U-shaped front
Unhook and secure the front
Lift the heat interface unit in the following
two places:
1. On the left hand side around the primary
strainer.
2. On the right hand side around the T-piece
below the energy meter.
Now, hang the heat interface unit onto bolts
in the wall.
Lifting instructions