Need help?Do you have a question about the Danfoss TT700 Series and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | TT700 Series |
| Category | Compressor |
| Language | English |
Defines the manual's purpose and target audience for Danfoss Turbocor compressors.
Provides a glossary of acronyms and terms used in the manual.
Specifies the refrigerants compatible with TT and TG series compressors.
Provides an overview of the compressor's key modules: aerodynamics, motor, and electronics.
Explains the flow of refrigerant through the compressor from intake to discharge.
Details how liquid refrigerant cools the compressor's electronic, mechanical, and electromechanical components.
Presents a block diagram of the compressor's control and monitoring system.
Details Motor Drive, Soft-Start, BMCC, Capacity Control, Expansion Valve, Motor/Bearing, Monitoring, Abnormal Conditions.
Details the backplane's role in interconnecting modules and power conversion.
Introduces the magnetic bearing system, its overview, and control system.
Provides guidelines for proper control wiring techniques to the compressor I/O board.
Explains how maximum operating pressure is regulated by alarm and trip limits.
Specifies the maximum discharge temperature limits for the compressor.
Details the suction pressure alarm and trip limits for various compressor models.
Specifies acceptable voltage and frequency ranges for compressor operation.
Explains adjustable current settings and the FLA/LRA ranges.
Covers protection requirements for AC input lines and power electronics.
Addresses CE compliance and the importance of EMI/EMC filtering for performance.
Provides guidelines for proper grounding of metal parts and cables.
Explains how performance is determined using software and website tools.
Defines the tolerance bands for capacity, efficiency, and power ratings.
Illustrates the operating limits for various TT and TG compressor models.
Specifies refrigerants for TT (R134a) and TG (R1234ze(E)) compressors.
Describes the magnetic bearing system for shaft levitation and friction elimination.
To Next Page
