Danfoss VLT 5000 Series User Manual

VLT ordering number , parameter 623:
Ordering number gives the ordering number of the VLT
type in question.
For example: 175Z0072.
Software version number, parameter 624:
Software version gives the version number.
For example: V 3,10.
LCP identification number, parameter 625:
The key data of the unit can be read out via the display
or the serial communication port.
For example:ID 1,42 2 kB.
Database identification number, parameter 626:
The key data of the unit can be read out via the display
or the serial communication port.
For example: ID 1,14.
Power section identification number, parameter
627:
The key data of the unit can be read out via the display
or the serial communication port.
For example: ID 1,15.
Application option type, parameter 628:
This gives the type of application options fitted with the
adjustable frequency drive.
Application option ordering number, parameter
629:
This gives the ordering number for the application op-
tion.
Communication option type, parameter 630:
This gives the type of communication options fitted
with the adjustable frequency drive.
Communication option ordering number, parame-
ter 631:
This gives the ordering number for the communication
option.
VLT
®
5000 Series
MG.51.C5.22 - VLT
p
is a registered Danfoss trademark. 153
Programming

Danfoss VLT 5000 Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Series
Category	DC Drives
Language	English