Need help?Do you have a question about the Danfoss VLT Series FC 102 and is the answer not in the manual?
General| Frequency Range | 50/60 Hz |
|---|---|
| Series | VLT® HVAC Drive FC 102 |
| Output Voltage | 0-100% of input voltage |
| Protection Rating | IP20 |
| Communication Options | CANopen, Profibus |
| Cooling Method | Forced convection |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | Max. 95% (non-condensing) |
Explains the guide's objective for quick installation of the PROFINET interface.
Lists resources for frequency converters and optional equipment.
Provides an overview of the PROFINET interface, including ordering numbers and intended use.
Lists the certifications obtained for the PROFINET MCA 120 interface.
Provides instructions for the proper disposal of electrical components.
Defines symbols, abbreviations, and conventions used throughout the manual.
Defines the warning and caution symbols used in the document to indicate hazards.
Specifies the qualifications and training required for personnel handling the equipment.
Details critical safety warnings and precautions for installation, operation, and maintenance.
Details specific hazards like leakage current, equipment contact, and internal failure.
Provides step-by-step instructions for mounting the fieldbus option and LCP cradle.
Guidance for achieving EMC-compliant installation following specific instructions.
Instructions for establishing proper grounding connections for EMC compliance.
Recommendations for routing cables to avoid EMC interference and ensure performance.
Explains star, line, and ring/redundant line topologies for PROFINET connections.
Details on using address switches to set the station name (host name).
Covers cabling requirements and specifications for Ethernet data transmission.
Step-by-step instructions for wiring the PROFINET interface for different enclosure types.
Instructions for reassembling the front cover and LCP after installation.
Guidance on applying power and initial detection of the PROFINET interface.
Notes on parameter settings after installing the PROFINET interface.
Information on PROFINET alarm words, warning words, and how they are displayed.
Explanation of the bi-coloured LEDs for diagnosing the PROFINET interface status.
Troubleshooting steps for resolving communication issues with the frequency converter.
Details the causes and actions for Warning 34 related to master communication.
To Next Page