Need help?Do you have a question about the Danfoss VLT Micro Drive FC 51 Series and is the answer not in the manual?
General| Brand | Danfoss |
|---|---|
| Model | VLT Micro Drive FC 51 Series |
| Category | Media Converter |
| Language | English |
Provides essential safety guidelines and warnings for operating the frequency converter.
Contains crucial general warnings regarding electrical hazards and safe handling.
Instructions to prevent unexpected motor start-up for user safety.
Step-by-step procedure to safely prepare for repair work on the converter.
General guidance on connecting cables and terminals for electrical installation.
Steps for safely connecting the unit to the mains power supply.
Instructions for connecting the motor to the frequency converter.
Introduction to programming methods for the frequency converter.
Instructions on using the Local Control Panel (LCP) for programming.
Introduction to the Modbus RTU communication protocol.
Guide on accessing and handling parameters via Modbus RTU.
Parameters related to motor power, voltage, frequency, current, and tuning.
Parameters for setting speed references, ramp times, and jog functions.
Parameters for motor speed limits, torque limits, and warnings.
Configuration of digital inputs, outputs, and relay functions.
Settings for analog inputs, outputs, and LCP potentiometer.
Parameters for process control, PI controller, and feed-forward settings.
Parameters for communication settings, logic rules, and serial ports.
Configuration of smart logic functions, comparators, and timers.
Explains alarm, warning, and extended status words with associated error codes.
Technical specifications for mains supply voltage, current, and frequency.
To Next Page
