Danfoss VLT Micro Drive FC 51 Series - Comm. and Options Parameters (8-**)

To Next Page

To Previous Page

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type

7 - 20 Process CL Feedback 1 Resource [0] No function All set-ups TRUE - Uint8

7 - 30 Process PI Normal/ Inverse Control [0] Normal All set-ups TRUE - Uint8

7 - 31 Process PI Anti Windup [1] Enabled All set-ups TRUE - Uint8

7 - 32 Process PI Start Speed 0 Hz All set-ups TRUE -1 Uint16

7 - 33 Process PI Proportional Gain 0.01 All set-ups TRUE -2 Uint16

7 - 34 Process PI Integral Time 9999 s All set-ups TRUE -2 Uint32

7 - 38 Process PI Feed Forward Factor 0% All set-ups TRUE 0 Uint16

7 - 39 On Reference Bandwidth 5% All set-ups TRUE 0 Uint8

6.2.12 7-** Controllers

VLT

Micro Drive FC 51 Operating Instructions 6 Parameter Overview

MG.02.A4.02 - VLT

is a registered Danfoss trademark

Other manuals for Danfoss VLT Micro Drive FC 51 Series