Danfoss VLT Micro Drive FC 51 Series - Digital In;Out Parameters (5-**)

To Next Page

To Previous Page

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type

4 - 10 Motor Speed Direction [2] Both directions All set-ups FALSE - Uint8

4 - 12 Motor Speed Low Limit [Hz] 0 Hz All set-ups FALSE -1 Uint16

4 - 14 Motor Speed High Limit [Hz] 65 Hz All set-ups FALSE -1 Uint16

4 - 16 Torque Limit Motor Mode 150% All set-ups TRUE 0 Uint16

4 - 17 Torque Limit Generator Mode 100% All set-ups TRUE 0 Uint16

4 - 50 Warning Current Low 0 A All set-ups TRUE -2 Uint32

4 - 51 Warning Current High 26 A All set-ups TRUE -2 Uint32

4 - 58 Missing Motor Phase Function [1] On All set-ups FALSE - Uint8

4 - 61 Bypass Speed From [Hz] 0 Hz All set-ups TRUE -1 Uint16

4 - 63 Bypass Speed To [Hz] 0 Hz All set-ups TRUE -1 Uint16

6.2.9 4-** Limits/Warnings

6 Parameter Overview VLT

Micro Drive FC 51 Operating Instructions

MG.02.A4.02 - VLT

is a registered Danfoss trademark

Other manuals for Danfoss VLT Micro Drive FC 51 Series