Danfoss VLT Micro Drive FC 51 Series - Special Functions Parameters (14-**)

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type 13 - 00 SL Controller Mode [0] Off 1 set-up TRUE - Uint8
13 - 01 Start Event [39] Start command 1 set-up TRUE - Uint8
13 - 02 Stop Event [40] Drive stopped 1 set-up TRUE - Uint8
13 - 03 Reset SLC [0] Do not reset 1 set-up TRUE - Uint8
13 - 10 Comparator Operand [0] Disabled 1 set-up TRUE - Uint8
13 - 11 Comparator Operator [1] ApproxEqual 1 set-up TRUE - Uint8
13 - 12 Comparator Value 0 1 set-up TRUE -1 Int32
13 - 20 SL Controller Timer 0 s 1 set-up TRUE -1 Uint32
13 - 40 Logic Rule Boolean 1 [0] False 1 set-up TRUE - Uint8
13 - 41 Logic Rule Operator 1 [0] Disabled 1 set-up TRUE - Uint8
13 - 42 Logic Rule Boolean 2 [0] False 1 set-up TRUE - Uint8
13 - 43 Logic Rule Operator 2 [0] Disabled 1 set-up TRUE - Uint8
13 - 44 Logic Rule Boolean 3 [0] False 1 set-up TRUE - Uint8
13 - 51 SL Controller Event [0] False 1 set-up TRUE - Uint8
13 - 52 SL Controller Action [0] Disabled 1 set-up TRUE - Uint8
6.2.14 13-** Smart Logic
VLT
®
Micro Drive FC 51 Operating Instructions 6 Parameter Overview
MG.02.A4.02 - VLT
®
is a registered Danfoss trademark 55
6