Danfoss VLT Micro Drive FC 51 Series

To Next Page

To Previous Page

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type

14 - 01 Switching Frequency [1] 4.0 kHz All set-ups TRUE - Uint8

14 - 03 Overmodulation [1] On All set-ups FALSE - Uint8

14 - 12 Function at Mains Imbalance [0] Trip All set-ups TRUE - Uint8

14 - 20 Reset Mode [0] Manual reset All set-ups TRUE - Uint8

14 - 21 Automatic Restart Time 10 s All set-ups TRUE 0 Uint16

14 - 22 Operation Mode [0] Normal operation 1 set-up TRUE - Uint8

14 - 26 Action At Inverter Fault [0] Trip All set-ups TRUE - Uint8

14 - 41 AEO Minimum Magnetisation 66 % All set-ups TRUE 0 Uint8

6.2.15 14-** Special Functions

6 Parameter Overview VLT

Micro Drive FC 51 Operating Instructions

MG.02.A4.02 - VLT

is a registered Danfoss trademark

Danfoss VLT Micro Drive FC 51 Series - Special Functions