Danfoss VLT Micro Drive FC 51 Series User Manual

Index
A
Active Set-up 17
Active Set-up 41, 46
Alarm, Warning And Extended Status Word 60
Ambient Temperature 65
Analog In/out 52
Analog Inputs 63
Analog Output 64
Automatic Motor Tuning (amt) 21
B
Brake Resistor 48
Brake Resistor (ohm) 41
Brake Resistor Short-circuited 59
Brakes 48
Bus Termination 15
C
Cable Lengths And Cross Sections 63
Clearance 9
Comm. And Options 54
Configuration Mode 22
Control Card, 10 V Dc Output 64
Control Card, 24 V Dc Output 64
Control Card, Rs-485 Serial Communication: 64
Control Terminals 15
Control Word According To Fc Profile 35
Controllers 53
Conversion Index 45
D
Danfoss Fc Control Profile 35
Data Readouts 58
Dc-brake 42
Dc-brake 41
De-coupling Plate Kit 66
Derating For Ambient Temperature 65
Derating For Low Air Pressure 65
Derating For Running At Low Speeds 65
Digital In/out 51
Digital Inputs (pulse/enocder Inputs): 63
Digital Inputs: 63
Din Rail Mounting Kit 10, 66
Display 17
Disposal Instruction 8
Drive Information 57
E
Earth Leakage Current 5, 7
Edit Set-up 17
Edit Set-up 41, 46
Electronic Waste 8
Emc-correct Installation 12
Explanation Of The Control Bits 35
Explanation Of The Status Bits 38
F
Frequency Converter With Modbus Rtu 25
Function Codes Supported By Modbus Rtu 29
Fuses 11
VLT
®
Micro Drive FC 51 Operating Instructions Index
MG.02.A4.02 - VLT
®
is a registered Danfoss trademark 67

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English