Danfoss VLT Micro Drive FC 51 Series - Page 69

H
Hand Mode 42
Hand Mode 47
How To Connect 11
I
Indicator Lights 18
Ip21 66
Isolated Mains Source 7
It Mains 7
L
Lcp 11 17
Lcp 12 17
Leakage Current 7
Limits/warnings 50
Load Compensation 41, 47
Load Sharing/brake 16
Load/motor 47
M
Main Menu 18, 24
Mains Connection 12
Mains Supply 61
Mains Supply (l1/l, L2, L3/n) 63
Mains Supply 1 X 200 - 240 Vac 61
Mains Supply 3 X 200 - 240 Vac 61
Mains Supply 3 X 380 - 480 Vac 62
Max. Reference 22
Maximum Reference 21
Mct-10 Set-up Software 17
Mechanical Dimensions 10
Mechanical Installation 9
Min. Reference 22
Minimum Reference 21
Modbus Rtu 25
Modbus Rtu Message Framing Structure 26
Modbus Rtu Overview 25
Motor Connection 13
Motor Current 20
Motor Direction 18
Motor Frequency 20
Motor Nominal Speed 21
Motor Output (u, V, W): 63
Motor Overload Protection 7
Motor Phase 42, 50
Motor Power 20
Motor Protection 63
Motor Speed High Limit 22
Motor Speed Low Limit 22
Motor Temperature 41
Motor Voltage 20
N
Navigation Keys 19
O
Operation Keys 19
Operation/display 46
Options 66
Options For Vlt Micro Drive Fc 51 66
Other Specifications 63
Index VLT
®
Micro Drive FC 51 Operating Instructions
68 MG.02.A4.02 - VLT
®
is a registered Danfoss trademark