Danfoss VLT - Page 12

VLT Installation
Rev.02
10
North America
Motion Controls
Confidential / Property of Danfoss Drives A/S
Compare VLT number with what was ordered.
Look for the RED label, typically on the Top or Left Side
Catalog Order Number System
Example: - XXXX–P-T5-B20–ST-R0–DL-F00-A00-C0
Series: VLT, FC, FCM, FCD
Model Number ---------------------|
Application --------------------------------|
P – Process; F - Flux; A - AQUA; G – Graham; H - HVAC
AC Line Voltage -----------------------------|
T2: 3 phase 200 – 240 Vac
T4: 3 phase 380 – 480 Vac
T5: 3 phase 380 – 500 Vac
T6: 3 phase 550 – 600 Vac
Enclosure (index mechanical dimensions)--|
B20: Bookstyle Chassis (IP20)
C00: Compact Chassis (IP 00)
C20: Compact Protected Chassis (IP 20)
CN1: Compact NEMA 1 (IP 20)
C54: Compact NEMA 12 (IP 54)
3) Pre-Installation Checks
d. Compare drive
Hardware – ST
DE= Fuse/Disc, 24V, Loadshare, DBrake; DX= Fuse/Disc, 24V, Loadshare;
EB= 24V, Loadshare, DBrake; EX= 24V, Loadshare; PB= Fuse/Disc, 24V, DBrake;
PD= Fuse/Disc, 24V; PF= 24V, Fuse; PS= 24V; SL= 24V, Loadshare; ST= No
options;
SB= DBrake
RFI Filter – R0
R0 means no extra filter
R1 adds 1A filter
R3 adds both 1A and 1B filter
Display – DL
DL means with LCP display
D0 is without the LCP
Fieldbus Option – F00
F00= none; F10= Profibus DP/FMS; F20= Modbus +; F30= DeviceNet;
F40= LonWorks FTP; F41= LonWorks 78 kbps; F42= LonWorks 1.25mbps
Application Option – A00
A00= none; A10= Programmable Sync/Pos Card; A11= Synchronizing card;
A12= Positioning Card; A30= 1 Relay Card; A31= 4 Relay Card;
A32= Cascade Controller Card
Conformal Coating – C0
C0 means no coating
C1 has coating