VLT Installation
Rev.02
27
North America
Motion Controls
Confidential / Property of Danfoss Drives A/S
Environmental Concerns
• Keep the drive clean
• Consider traffic patterns
• Use dust covers to cover VLT during construction
• Remove the dust covers before applying power
4) Installation Checks
b. Environmental Concerns
4) Installation Checks
b. Environmental Concerns
If construction work continues after the drive is mounted, it is important to keep the
drive as free as possible from concrete dust and similar dirt. If the drive does not
have power applied to it, it should be kept covered. If the drive must be powered up
and run, this cover must be removed. It is still important to ensure that the drive
stays as clean as possible. It may be necessary to clean the interior of the drive
once construction is completed.
To Next Page
Loading...
