VLT Installation
Rev.02
48
North America
Motion Controls
Confidential / Property of Danfoss Drives A/S
Student is able to…
• State the main danger and precaution to be taken when
working with a VLT.
• Identify the Reference Material needed for an installation
and where that material may be found.
• Locate and explain each of the 9 steps needed during the
pre-installation checks.
• Identify the 4 installation checks for proper operation.
• Identify the correct terminals and general instructions
concerning the wiring of the power input, motor output,
control, external 24Vdc, brake and load-sharing.
Answers to the questions are on the Note Pages
Objectives
Answers:
1) E 2) A 3) D 4) B 5) A
6) B 7) C 8) E 9) C 10) D
To Next Page
Loading...
