Focus Settings
Autofocus
Select [Auto Focus] to trigger the autofocus function.
The image will automatically become clear.
Method 1: Press the red side key (up) for manual focus.
Press and hold for 2 seconds for autofocus.
Method 2: Go to [Projector], select [Focus], and choose either
manual focus or autofocus.
Network Settings
ㆍGo to [Settings], select [Network & Internet], and turn on Wi-Fi.
ㆍChoose your network and enter the correct password.
Manual focus
Select [Manual Focus] and use the navigation keys (up / down)
on the remote control to adjust the focus distance and make
the image clear.
Press the
red side key
Settings
Network & Internet
Wi-Fi
GENERAL SETTINGS
Network & Internet
Dangbei_5G
Dangbei_5G
Connected
Dangbei_2.4G
My_WiFi_5G
See all
Add new network
09
EN
To Next Page
Loading...
