mportant Precautions
Do not look directly at the projection beam with your eyes, because the strong beam may harm your eyes. RGI IEC 62471-5.12015
Do not block or cover the heat dissipation holes of the device to avoid affecting the heat dissipation of the internal parts, and damaging
the device
Keep away from humidity, exposure, high temperature, low pressure, and magnetic environments.
Do not place the device in areas susceptible to excessive dust and dirt
Place the device in a flat and stable station, and do not place the device on a surface that is prone to vibration
Do not allow children to handle the device without supervision
Do not place heavy or sharp objects on the device.
Avoid extreme vibrations, because these may damage the internal components
Please use the correct type of battery for the remote control
Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive power adapter, bracket, etc )
Do not disassemble the device. The device should only be repaired by staff authorized by the manufacturer.
Place and use the device in a 0-4000 environment
The plug is considered as a disconnected device of the adapter.
The adapter should be installed near the equipment, and should be easily accessible
Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point where this exi s
from the device
Unplug this device if there are lightning storms or when unused for a long period of time
Where the power plug or an appliance coupler is used to disconnect the device, the disconnected device would remain readily operabl
Never touch the power cable or power connector with wet hands
16
To Next Page
Loading...
