P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PA G E 17
HINTS AND TIPS
PROBLEM POSSIBLE CAUSES WHAT TO DO
The cooktop
cannot be
turned on.
No power. Make sure the cooktop is connected to the
power supply and that it is switched on. Check
whether there is a power outage in your home
or area. If you’ve checked everything and the
problem persists, call a qualified technician.
The touch
controls are
unresponsive.
The controls are locked. Unlock the controls. See section
‘Using your ceramic cooktop’ for instructions.
The touch controls
operate.
There may be a slight film of water over the
controls or you may be using the tip of your
finger when touching the controls.
Make sure the touch control area is dry
and use the ball of your finger when touching
the controls.
The glass is
being scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or cleaning
products being used.
Use cookware with flat and smooth bases. See
‘Choosing the right cookware’.
See ‘Care and Cleaning’.
Some pans make
crackling or
clicking noises.
This may be caused by the construction of
This is normal for cookware and does not
indicate a fault.
NOTE: Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
COOKING HOB DAN6TY
Cooking Zones 4 zones
Supply Voltage 220-240V~
Installed Electric Power 5856-6969W
Product Size L×W×H(mm) 590X520X52
Building-in Dimensions A×B (mm) 560X490
TECHNICAL SPECIFICATION
To Next Page
Loading...
