UG-001 Daniels P25 Radio Systems
www.danelec.com
ii
User
Guide
Copyright
©
2005 Daniels Electronics Ltd. All rights reserved. No part
of this publication may be reproduced, stored in a retrieval system
or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written consent
of Daniels Electronics Ltd.
DE™ is a registered trademark of Daniels Electronic Ltd. registered in
the U.S. Patent and Trademark Offi ce.
Motorola® is a registered trademark of Motorola, Inc.
NOTE
Daniels Electonics Ltd. utilizes a three-level revision system. This system
enables Daniels to identify the signifi cance of a revision. Each element
of the revision number signifi es the scope of change as described in the
diagram below.
DOCUMENT REVISION
DEFINITION
Major Revisions: The result of a major
change to product function, process or
requirements.
Minor Revisions: The result of a
minor change to product, process or
requirements.
Editorial Revisions: The result of typing
corrections or changes in formatting,
grammar or wording.
1-0-0
Three-level revision numbers start at 1-0-0 for the fi rst release. The
appropriate element of the revision number is incremented by 1 for each
subsequent revision, causing any digits to the right to be reset to 0.
For example:
If the current revision = 2-1-1 Then the next major revision = 3-0-0
If the current revision = 4-3-1 Then the next minor revision = 4-4-0
If the current revision = 3-2-2 Then the next editorial revision = 3-2-3
Daniels Electronics Ltd.
43 Erie Street, Victoria, BC
Canada V8V 1P8
www.danelec.com
sales@danelec.com
Toll Free Canada and USA:
phone: 1-800-664-4066
fax: 1-877-750-0004
International:
phone: 250-382-8268
fax: 250-382-6139
PRINTED IN CANADA
Document Number:
Revision:
Revision Date:
UG-001
1-1-0
August 2005
To Next Page
Loading...